All information provided is for informational purposes only. Use at your own risk.
Thanks for the suggestion I tried that and no Improvement.
I just don't understand when it was on the S1 stream it was way too loud and I had to turn the volume down
and now on the S2 stream I can hear with the volume at max but when a/c comes on I cant hear the tv
Hopefully S1 comes back online and I can try again appreciate the help here
If you have an AV cable, try that.
The Mag box has one input for AV (Audio/Video) and not three (Yellow,White,Red)
You would need a cable with the three jacks on the one end (Yellow =Video & Red/White = Audio) and one jack on the other end.
And of course you'd need a TV with the 3 AV inputs (Y R W)
I suggest this because the Mag I have here lost audio thru HDMI sometime ago and I have had to connect the AV cable to gain back the Audio.
The S1 and S2 portals may have their audio tracks set differently. One may be Mono while the other may be Stereo or something like that.
Incidentally you can see the Audio Track settings while viewing LiveTV channels thru the Mode button on your RCU, which is just below the Yellow button.
The Mag box after a few years (5 or 6 years here), seems like it looses or partially looses it's HDMI functionality.
Alot goes on in those HDMI connections, including AC power, so I'd try things that eliminate the HDMI (like the AV Cable).
Last edited by crazed 9.6; 07-29-2021 at 06:58 AM.
I must not forget, we must not forget, that we are human beings.
- Ren
Hey Finally got the Volume problem solved.
I found a solution that worked
I reset the remote control by pressing the setup button and OK button together at same time for 2 secs
I waited until i seen red power button flashing
Now it works perfectly but that wipes out programming to operate TV remote
So I need to program the remote for that
Very Happy Now