Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 78

Thread: Softwre Updates

  1. #51
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    Dreamlink T3
    Sept 25 HotFix


    Install and use at your own risk.
    Software cannot be rolled back after installation.

    Firmware Version : 1.4.75 HOTFIX
    Change Log
    FIX: Cannot connect to some portals


    Tested with results as below...
    -If you currently are not seeing any portal issues, then no need to install this update.
    -You can choose to wait for the next Official or Beta Update.
    -The update is a Firmware version update only and does not affect the MOL2 version.
    After installing this Hotfix Firmware update v1.4.75, your MOL2 IPTV version will remain at v7.9.3 or what ever was the last MOL2 version you have installed.
    "The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
    - Frank Zappa

  2. #52
    JOKER Tha Joker's Avatar
    Join Date
    Sep 2016
    Location
    yes i do
    Posts
    414
    Rep Power
    91
    Dreamlink T3
    November 6


    Firmware Version : 1.4.78 BETA



    MYTVOnline 2 : 7.10.1 BETA




    WARNING:

    Install and use at your own risk. Software cannot be rolled back after installation.



    HowTo Install:
    Home Menu -> Software Update -> press "0227" -> Red Icon and Beta Test SW appear (right corner) -> Press Red Button -> Now is the Firmware and Software shown, press now "OK" button for install.


    The install process and reboot works automatically! Please don`t turn off the box or plug out the power supply, could damage the box. The reboot after update needs always much longer than usual, please be patinate and let the box finish the install. If necessary reboot later once again.


    Firmware Version : 1.4.78 BETA






    Fixes & Improvements:


    • NEW: Change system screenshot path. Home > Launcher Settings > Screenshot path
    • FIX: Z Alpha Bluetooth issue
    • FIX: Crash fix for some OTT apps (SVTPlay, etc.)
    • FIX: CEC on/off switch state not saved
    • IMP: Updated system time zones
    • IMP: NAS mount now visible to other apps
    • IMP: Rename "HDMI Auto Adaption" & change behavior to "Auto-select BEST resolution"
    • IMP: Block incoming Bluetooth files. Use Android Settings > Security > Allow incoming BT requests: OFF
    • IMP: Disconnect and reconnect BT Audio devices without re-pairing
    • IMP: Updated remote deployment template
    • IMP: CEC: Wake up TV with Formuler. Wake up Formuler with TV (Must use Standby power mode)
    • IMP: Memory utilization optimizations
    • Bug fixes, optimizations, and performance enhancements







    MYTVOnline 2 : 7.10.1 BETA




    New Features, Fixes & Improvements:


    • NEW: Live > Filter only Favorites. Activate from Classic Channel List > Filter (Red hotkey)
    • NEW: Recordings > track progress and resume playback
    • NEW: VOD Details > Date Added
    • NEW: Auto-detect API portal from m3u URL
    • FIX: Danish subtitle display issue
    • FIX: EPG offset issue with certain services
    • FIX: Audio Track Language not displayed for some contents
    • FIX: Menu navigation issue for services with no Live TV section
    • FIX: Issue with Maximum catchup (replay) days
    • FIX: picon display issues
    • FIX: Edit Groups > Cannot select certain Groups
    • FIX: Online subtitles not displayed immediately after download
    • FIX: Player controls do not timeout according to OSD Timeout parameter
    • FIX: Episode list scrolling issue on certain portals
    • FIX: VOD ends early if paused
    • IMP: Opensubtitles > add all languages
    • Set preferred languages from Settings > Player Options > Online Subtitles
    • IMP: Cursor position automatically moved to last watched index in episode list
    • IMP: Improved Skip Ahead performance
    • IMP: Scheduled Recordings: Resolve single instance of series conflict
    • IMP: Warn before powering off if recording is in progress
    • NEW: Menu Translation: Slovenčina
    • IMP: Improved Swedish, French Translation (Thanks tvman, GoodGood)
    • Bug fixes, optimizations, and performance enhancements

  3. #53
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    Dreamlink T3
    Official Release

    November 15, 2020

    Install and use at your own risk.
    Software cannot be rolled back after installation.

    Firmware Version : 1.4.80
    Change Log
    NEW: Change system screenshot path. Home > Launcher Settings > Screenshot path
    FIX: Crash fix for some OTT apps
    FIX: CEC on/off switch state not saved
    FIX: Deployment tools bug that appeared in beta release. (Allow user portals parameter bug)
    IMP: Updated system time zones
    IMP: NAS mount now visible to other apps
    IMP: Rename "HDMI Auto Adaption" & change behavior to "Auto-select BEST resolution"
    IMP: Block incoming Bluetooth files. Use Android Settings > Security > Allow incoming BT requests: OFF
    IMP: Disconnect and reconnect BT Audio devices without re-pairing
    IMP: Updated remote deployment template
    IMP: CEC: Wake up TV (Must use Standby power mode)
    IMP: Memory utilization optimizations
    Bug fixes, optimizations, and performance enhancements


    MYTVOnline 2 : 7.10.2
    Change Log
    NEW: Live > Filter only Favorites. Activate from Classic Channel List > Filter (Red hotkey)
    NEW: Recordings > track progress and resume playback
    NEW: VOD Details > Date Added
    NEW: Auto-detect API portal from m3u URL
    NEW: Live TV: Press and HOLD PLAY to start Cloud Timeshift
    FIX: Danish subtitle display issue
    FIX: EPG offset issue with certain services
    FIX: Audio Track Language not displayed for some contents
    FIX: Menu navigation issue for services with no Live TV section
    FIX: Issue with Maximum catchup (replay) days
    FIX: picon display issues
    FIX: Edit Groups > Cannot select certain Groups
    FIX: Online subtitles not displayed immediately after download
    FIX: Player controls do not timeout according to OSD Timeout parameter
    FIX: Episode list scrolling issue on certain portals
    FIX: VOD ends early if paused
    FIX: Cannot delete new recordings
    FIX: Opus audio playback issue
    IMP: Opensubtitles > add all languages
    - Set preferred languages from Settings > Player Options > Online Subtitles
    IMP: Cursor position automatically moved to last watched index in episode list
    IMP: Improved Skip Ahead performance
    IMP: Scheduled Recordings: Resolve single instance of series conflict
    IMP: Warn before powering off if recording is in progress
    NEW: Menu Translation: Slovenčina
    IMP: Improved Swedish, French Translation (Thanks tvman, GoodGood)
    Bug fixes, optimizations, and performance enhancements
    Last edited by crazed 9.6; 02-16-2021 at 03:15 AM.
    "The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
    - Frank Zappa

  4. #54
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    You may see an update today @ Feb 16, 2021
    This update is a HotFix Official update for the v7.10.2 MOL2 update.
    It is mostly to address a few things with the Formuler CC model and you can see them notes thru your onscreen update menu.

    I did load this onto my T3 this morning even thou the T3 did not need it, but as it was an Official release, I wanted to get rid of the official Update notification and of course test the file for us.

    Loaded fine with no issues, as expected.
    Firmware v1.4.80
    IPTV MOL2 v7.10.4
    Last edited by crazed 9.6; 02-16-2021 at 03:24 AM.
    "The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
    - Frank Zappa

  5. #55
    TV Addicted bugmeso's Avatar
    Join Date
    Feb 2015
    Location
    HUH?
    Posts
    95
    Rep Power
    16
    Quote Originally Posted by crazed 9.6 View Post
    You may see an update today @ Feb 16, 2021
    This update is a HotFix Official update for the v7.10.2 MOL2 update.
    It is mostly to address a few things with the Formuler CC model and you can see them notes thru your onscreen update menu.

    I did load this onto my T3 this morning even thou the T3 did not need it, but as it was an Official release, I wanted to get rid of the official Update notification and of course test the file for us.

    Loaded fine with no issues, as expected.
    Firmware v1.4.80
    IPTV MOL2 v7.10.4
    On my end, now I have no audio or video but do have EPG.

  6. #56
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    Quote Originally Posted by bugmeso View Post
    On my end, now I have no audio or video but do have EPG.
    check your internet access is still connected.
    On Home Launcher screen scroll down to Network settings and check that.
    "The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
    - Frank Zappa

  7. #57
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    Dreamlink T3
    Beta Release / February 25 2021


    Beta Test Software Update password = 0227

    Install and use at your own risk.
    Software cannot be rolled back after installation.

    Firmware Version : 1.4.90 BETA
    Change Log
    NEW: Enable 4K DCI output resolution for projectors
    NEW: Support for PS5™ DualSense™ controller (USB and BT)
    NEW: Support for Xbox Series S/X controller (USB and BT)
    NEW: Support for PlayStation® DS4 1st and 2nd generation controllers (USB and BT)
    NEW: Support for Geniatech T230 USB DVB-T tuner (Retail version)
    NEW: Add 'Disable USB audio routing' menu to System Sound menu
    FIX: Original remote keymap changes when modifying hotkeys using Remote app
    Bug fixes, optimizations, and performance enhancements


    MYTVOnline 2 : 7.11.0 BETA
    Change Log
    NEW: Add ability to schedule OTA ATSC/DVB recordings while current connection type is IPTV (model specific).
    NEW: Add Search by Actor feature for VOD. Works with compatible services.
    - Click on the Actor's photo under VOD/Series details to initiate the search
    NEW: Rename custom favorite groups
    - My Groups > Press and hold OK on a created group to access the editor context menu
    NEW: Cloud TS playback from Classic channel list on MAC portal
    - Press the Play button to start replay
    NEW: Replay for current event from Single EPG on supported channels
    - Press OK on the current event to start replay
    NEW: Add file browser for adding new m3u/xmltv from local filesystem
    FIX: Grid EPG not displayed until list is scrolled
    FIX: Issue when parsing m3u with special characters
    FIX: Duplicate Recording/Reminders shown in program guide
    FIX: Screen corruption in Grid EPG when watching 4k contents at 4k output resolution
    FIX: Portal ordering issue after Remote Configuration update
    FIX: xmltv EPG channel mapping issue
    FIX: Online subtitle search not working with Greek language
    FIX: VOD ends early if paused
    IMP: Improved CEA608 Closed Captions display formats
    IMP: Press BACK at 'Resume Playback' prompt to go to previous menu
    IMP: Improved French Translation
    Bug fixes, optimizations, and performance enhancements
    Last edited by crazed 9.6; 02-27-2021 at 10:58 AM.
    "The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
    - Frank Zappa

  8. #58
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    Dreamlink T3
    Official Release / March 10, 2021


    Install and use at your own risk.
    Software cannot be rolled back after installation.

    Firmware Version : 1.4.91
    Change Log
    NEW: Enable 4K DCI output resolution for projectors
    NEW: Support for PS5™ DualSense™ controller (USB and BT)
    NEW: Support for Xbox Series S/X controller (USB and BT)
    NEW: Support for PlayStation® DS4 1st and 2nd generation controllers (USB and BT)
    NEW: Support for Geniatech T230 USB DVB-T tuner (Retail version)
    NEW: Add 'Disable USB audio routing' menu to System Sound menu
    FIX: Original remote keymap changes when modifying hotkeys using Formuler Remote app
    Bug fixes, optimizations, and performance enhancements

    MYTVOnline 2 : 7.11.1
    Change Log
    NEW: Add ability to schedule OTA ATSC/DVB recordings while current connection type is IPTV
    NEW: Add Search by Actor feature for VOD. Works with compatible services.
    - Click on the Actor's photo under VOD/Series details to initiate the search
    NEW: Rename custom favorite groups
    - My Groups > Press and hold OK on a created group to access the editor context menu
    NEW: Cloud TS playback from Classic channel list on MAC portal
    - Press the Play button to start replay
    NEW: Replay for current event from Single EPG on supported channels
    - Press OK on the current event to start replay
    NEW: Add file browser for adding new m3u/xmltv from local filesystem
    FIX: Grid EPG not displayed until list is scrolled
    FIX: Issue when parsing m3u with special characters
    FIX: Duplicate Recording/Reminders shown in program guide
    FIX: Screen corruption in Grid EPG when watching 4k contents at 4k output resolution
    FIX: Portal ordering issue after Remote Configuration update
    FIX: xmltv EPG channel mapping issue
    FIX: Online subtitle search not working with Greek language
    FIX: VOD ends early if paused
    FIX: Certain m3u favorites not saved
    IMP: Improved Episode display order
    IMP: Improved CEA608 Closed Captions display formats
    IMP: Press BACK at 'Resume Playback' prompt to go to previous menu
    IMP: Improved French Translation
    Bug fixes, optimizations, and performance enhancements[/QUOTE]
    "The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
    - Frank Zappa

  9. #59
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,650
    Rep Power
    447
    Dreamlink T3
    HOTFIX Release / March 25, 2021


    Install and use at your own risk.
    Software cannot be rolled back after installation.

    Firmware Version : 1.4.92 HOTFIX
    Change Log
    FIX: Leanback Launcher has stopped
    FIX: MYTVOnline2 has stopped
    FIX: HLS Adaptive bitrate streaming issues
    FIX: Incorrect French Translation (Sauvegarde & Restaurer)
    Miscellaneous bug fixes and optimizations


    Dreamlink T3
    BETA Release / March 31, 2021


    Install and use at your own risk.
    Software cannot be rolled back after installation.

    MYTVOnline 2 : 7.11.2 BETA
    Change Log
    FIX: Additional crash fixes
    IMP: API portal > Improved search logic
    IMP: Automatically fetch EPG data at Normal channel list
    IMP: Improve series episode list loading scenario for MAC portals

  10. #60
    JOKER Tha Joker's Avatar
    Join Date
    Sep 2016
    Location
    yes i do
    Posts
    414
    Rep Power
    91
    New MOL2 software update for Dreamlink T3. April 7

    MYTVOnline 2 : v.7.11.3



    WARNING:
    Install and use at your own risk. Software cannot be rolled back after installation.
    If serious errors occur, please do factory reset.




    The install process and reboot works automatically! Please don`t turn off the box or unplug the power supply, could damage the box. The reboot after update needs always much more time then usual, please be patinate and let the box finish the install.




    Change Log

    MYTVOnline 2 : 7.11.3




    New Features, Fixes & Improvements:



    • FIX: Additional crash fixes
    • IMP: Show PiP channel name when info banner is on-screen
    • IMP: API portal > Improved search logic
    • IMP: Automatically fetch EPG data at Normal channel list
    • IMP: Improve series episode list loading scenario for MAC portals
    • IMP: Improved French Translation
    • Bug fixes, optimizations, and performance enhancements






 

 
Page 6 of 8 FirstFirst ... 45678 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •