Register
Results 1 to 9 of 9

Thread: software update

  1. #1
    Super Modz crazed 8.4's Avatar
    Join Date
    Nov 2014
    Posts
    10,862
    Rep Power
    280

    software update

    Minor software update released for Z-series devices , (excluding Z8)

    Firmware Version: 2.8.60 or 1.2.60 (model dependent)
    •Added Bluetooth shortcut to Quick Settings menu
    •Added ON/OFF switch in WLAN menu

    MYTVONLINE Version: 1.9.62
    •FIX : Portal init issue
    •FIX : Adult group bug
    pepisee

  2. #2
    Super Modz crazed 8.4's Avatar
    Join Date
    Nov 2014
    Posts
    10,862
    Rep Power
    280
    Formuler Z-series beta software released. (Excluding Z8)

    Firmware Version : 2.8.70 or 1.2.70 BETA (Device dependent)
    MYTVOnline : 1.9.70 BETA

    WARNING: Install and use at your own risk. Software cannot be rolled back after installation.

    Change Log

    [SYSTEM] FIX: Internal WLAN dropping issue
    [SYSTEM] FIX: Display Resolution button doesn't show resolution selection window
    [SYSTEM] IMP: Display resolution selection window only shows compatible resolutions
    [SYSTEM] FIX: System software update hangs when system memory is full
    [SYSTEM] IMP: Improved front panel boot-up LED sequence
    [SYSTEM] FIX: Android Location Services
    [SYSTEM] ADD: Add mini market to Nano model. More apps to be added soon.
    [MOL] FIX: Radio channel streaming issue on certain portals
    [MOL] IMP: Increased refresh rate of detailed stream info
    [MOL] FIX: Episode playback issue on certain portals
    [MOL] FIX: Crashing issue when switching portals
    [MOL] FIX: Favorite list changes if m3u list is updated
    [MOL] FIX: Page scrolling issue in TV Series section
    [MOL] FIX: xmltv EPG parsing issue
    [MOL] FIX: Cell overlap issue in Program Guide
    [MOL] FIX: HLS VOD playback issue
    [MOL] FIX: Group Channel Numbering preference changes after applying Installer Mode config
    [MOL] FIX: Recording stops if stream buffers
    [MOL] FIX: m3u channel parsing issue
    [MOL] FIX: TV Series playback/seek issue
    [MOL] FIX: Favorite channels disappear when using Xtream Codes API
    [MOL] FIX: Freeview HD EPG display issue when using USB DVB-T tuner
    [MOL] FIX: Timeshift file is created on USB even if Timeshift is set to OFF
    Various bug fixes and performance improvements

    Known Issues: Duration incorrectly displayed during catchup playback
    pepisee

  3. #3
    Master Warrior Ryu's Avatar
    Join Date
    Nov 2014
    Location
    Acquiring Signal
    Posts
    1,840
    Rep Power
    79
    friend was having issue with wifi every time she boots up her box and manually had to connect wifi. so I hard wire for her. I called her and made her update her box and removed ethernet cable. gave couple roboots and wifi gets connected instantly. good work formuler team.
    All information provided is for informational purposes only. Use at your own risk.

  4. #4
    Member
    Join Date
    Oct 2017
    Location
    YES I DO
    Posts
    86
    Rep Power
    6
    i notice the z8 update is dependant on mol2 do z7 boxes have to make the same switch mol2 for firmware updates ? reason i ask is im still at 1.9.62 and dont see an update for 1.9.70 yet i was just wondering if we also have to change to the mol2 in order to update ?

  5. #5
    Super Modz crazed 8.4's Avatar
    Join Date
    Nov 2014
    Posts
    10,862
    Rep Power
    280
    'device or model dependent' is just a statement that defines the different firmware versions for these Formuler Z Series models (excluding the z8) and nothing to do with needing to install the MOL2

    The Formuler boxes with the Firmware versions 2.8.70 (and earlier) are the Z-Nano, Z-Plus and Z-Prime models.
    The Formuler boxes with the Firmware versions 1.2.70 (and earlier) are the Zx and the Z7+ models.

    And the Z8 is different again and not the same Firmware at all.

    The MOL2 is currently only available with the z8 models.
    pepisee

  6. #6
    Member
    Join Date
    Oct 2017
    Location
    YES I DO
    Posts
    86
    Rep Power
    6
    thanks for clearing that up for me crazed ..

  7. #7
    Super Modz crazed 8.4's Avatar
    Join Date
    Nov 2014
    Posts
    10,862
    Rep Power
    280
    Firmware Version : 2.8.71 or 1.2.71 (Device dependent)
    MYTVOnline : 1.9.71

    WARNING: Install and use at your own risk. Software cannot be rolled back after installation.

    Change Log

    [SYSTEM] ADD: Mini app market for Nano
    [SYSTEM] FIX: Internal WLAN dropping issue
    [SYSTEM] FIX: Display Resolution button doesn't show resolution selection window
    [SYSTEM] IMP: Display resolution selection window only shows compatible resolutions
    [SYSTEM] FIX: System software update hangs when system memory is full
    [SYSTEM] IMP: Improved front panel boot-up LED sequence
    [SYSTEM] FIX: Android Location Services

    [MOL] FIX: Radio channel streaming issue on certain portals
    [MOL] IMP: Increased refresh rate of detailed stream info
    [MOL] FIX: Episode playback issue on certain portals
    [MOL] FIX: Crashing issue when switching portals
    [MOL] FIX: Favorite list changes if m3u list is updated
    [MOL] FIX: Page scrolling issue in TV Series section
    [MOL] FIX: xmltv EPG parsing issue
    [MOL] FIX: Cell overlap issue in Program Guide
    [MOL] FIX: HLS VOD playback issue
    [MOL] FIX: Group Channel Numbering preference changes after applying Installer Mode config
    [MOL] FIX: Recording stops if stream buffers
    [MOL] FIX: m3u channel parsing issue
    [MOL] FIX: TV Series playback/seek issue
    [MOL] FIX: Favorite channels disappear when using XC API
    [MOL] FIX: Freeview HD EPG display issue when using USB DVB-T tuner
    [MOL] FIX: Timeshift file is created on USB even if Timeshift is set to OFF
    [MOL] IMP: Grid EPG data request rate
    [MOL] ADD: VOD Favorites
    [MOL] FIX: VOD Search not working with XC API portals
    Various bug fixes and performance improvements



    *And also a new version of Update App released.
    It is to solve the issue where some users can't see the new firmware thru the Update app.

    This is only an update for the Update Application itself and not a Firmware or an IPTV (MOL) update.
    You will see the updating process show 'Check Update v1.1.1' and then it should change to 'Check Update v2.0.0'

    That is the Update app version, with v2.0.0 being the new update installed.

    You may have to do the update twice in order to get the 2.0.0 version to load.
    Last edited by crazed 8.4; 04-29-2019 at 09:02 PM.
    pepisee

  8. #8
    Super Modz crazed 8.4's Avatar
    Join Date
    Nov 2014
    Posts
    10,862
    Rep Power
    280
    MYTVOnline Hotfix v1.9.72
    Posted: 09/05/2019
    MYTVOnline hotfix for Z-series devices released (excluding Z8)
    Version: v1.9.72

    Patch Notes:
    FIX: Software Update loop
    FIX: Favorite channels not working on certain XC portals
    pepisee

  9. #9
    Super Modz crazed 8.4's Avatar
    Join Date
    Nov 2014
    Posts
    10,862
    Rep Power
    280
    MYTVOnline1
    1.9.80 BETA HOTFIX

    Change Log
    FIX : XE Channel ID issue
    ADD : VOD/Series Favorite Category
    IMP : Restrict VOD metadata HTTP request rate
    General Bug Fixes
    pepisee

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •