What is wrong when----

[kcmood]

My mag 254 is giving me a hard time. I can turn it on, it will have the imfomir logo it gets to loading and it is stuck there. Is there something I can do to fix this?

[tonyd33]

My mag 254 is giving me a hard time. I can turn it on, it will have the imfomir logo it gets to loading and it is stuck there. Is there something I can do to fix this?

Do you get to the yellow bar.

[kcmood]

No, I do not get beyond the first loading. It should goto a black screen that says loading and then the yellow bar. I also cannot turn it off unless I unplug the power cord.
In other words the first loading is with the infomir logo, then a black screen with a loading again then the yellow bar.

[tonyd33]

Go into BIOS and scroll down to DEF.SETTINGS and reset,also make sure boot mode says nand.

[kcmood]

I will try that again but I have tried repeatably and the bios will not come up

[kcmood]

I went into bios again and am where I was before. When I plug in power cord I get "loading from nand, then checking image, then loading". That is where it sits for about 30 - 40 sec and then screen goes black and it cuts off. I will add, which I should have done before, we had a thunder and lightning storm the day it went off and ever since its not working. We did not lose power but we had a powerful storm and my tv in bedroom was fried, it came thru the antenna OTA. The iptv box is in the living room.

[tonyd33]

Go back to bios and lower the resolution.

[kcmood]

Will have to try that tomorrow. Off to work I go

[chevy69]

reboot modem, router, then try it, unplug cat5 and try it if rebooting does not work, it should still load, but tell you internet out,

[kcmood]

reboot modem, router, then try it, unplug cat5 and try it if rebooting does not work, it should still load, but tell you internet out,

I unplugged the cat 5 as you suggested but it still will not load. Any other suggestions?