I don't think I can ask for exchange as I bought this more than a year ago.
I don't think I can ask for exchange as I bought this more than a year ago.
Personally I'd try this. What have you got to lose?
http://iptvtalk.net/showthread.php?3...le-for-T1-Plus
I have tried this but no luck.
Can someone guide me with re-flashing the box?
The recovery also assumes that you would see a message on screen -- Message appears on screen: "IPTVLauncher isn't responding."
If you wanna try again thou...
Below are the directions (updated to make more sense)...
Formuler Z Series Recovery tool instructions.
Affected models:
-Formuler Z Prime
-Formuler Z+
-Formuler Z
Applicable Software version:
July 2017 Firmware 2.7.70
Symptoms:
-After updating to Firmware 2.7.70, the set does not boot to the home screen.
-Black screen is shown and the following message appears on screen: "IPTVLauncher isn't responding."
Recovery Instructions:
1. Extract update.ird from the ZIP archive to USB root. Make sure update.ird is the only file on the USB.
2. Insert USB into Formuler Z device.
3. Remove power cord from Formuler Z device.
4. Insert power cord while repeatedly pressing the CH UP button on the RCU until the "Installing system update..." message appears on-screen.
5. Set is repaired and user settings remain unmodified.
Last edited by crazed 9.6; 11-13-2018 at 03:21 AM.
"The illusion of freedom will continue for as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will take down the scenery, move the tables and chairs out of the way, then they will pull back the curtains and you will see the brick wall at the back of the theater."
- Frank Zappa