T1+ doean't boot/no screen

[samshah]

I don't think I can ask for exchange as I bought this more than a year ago.

[Gabacho]

Personally I'd try this. What have you got to lose?

http://iptvtalk.net/showthread.php?3...le-for-T1-Plus

[samshah]

I have tried this but no luck.

[samshah]

Can someone guide me with re-flashing the box?

[crazed 9.6]

Can someone guide me with re-flashing the box?

The recovery also assumes that you would see a message on screen -- Message appears on screen: "IPTVLauncher isn't responding."
If you wanna try again thou...
Below are the directions (updated to make more sense)...

Formuler Z Series Recovery tool instructions.
Affected models:
-Formuler Z Prime
-Formuler Z+
-Formuler Z

Applicable Software version:
July 2017 Firmware 2.7.70

Symptoms:
-After updating to Firmware 2.7.70, the set does not boot to the home screen.
-Black screen is shown and the following message appears on screen: "IPTVLauncher isn't responding."

Recovery Instructions:
1. Extract update.ird from the ZIP archive to USB root. Make sure update.ird is the only file on the USB.
2. Insert USB into Formuler Z device.
3. Remove power cord from Formuler Z device.
4. Insert power cord while repeatedly pressing the CH UP button on the RCU until the "Installing system update..." message appears on-screen.
5. Set is repaired and user settings remain unmodified.

[samshah]

There is no method to do this, with the T1 plus box.

The T1 Plus is sister-ship to the Formuler Z Nano.
The recovery file is meant for the other Z series Formuler boxes, but not meant the Formuler Z Nano.
It can't hurt. but almost positive it will not work on the Plus box.

Fomuler Z and Z Prime and Z7+ ... which are sister-ship to the original T1 and the T2.

The recovery also assumes that you would see a message on screen -- Message appears on screen: "IPTVLauncher isn't responding."
If you wanna try again thou...
Below are the directions (updated to make more sense)...

Formuler Z Series Recovery tool instructions.
Affected models:
-Formuler Z Prime
-Formuler Z+
-Formuler Z

Applicable Software version:
July 2017 Firmware 2.7.70

Symptoms:
-After updating to Firmware 2.7.70, the set does not boot to the home screen.
-Black screen is shown and the following message appears on screen: "IPTVLauncher isn't responding."

Recovery Instructions:
1. Extract update.ird from the ZIP archive to USB root. Make sure update.ird is the only file on the USB.
2. Insert USB into Formuler Z device.
3. Remove power cord from Formuler Z device.
4. Insert power cord while repeatedly pressing the CH UP button on the RCU until the "Installing system update..." message appears on-screen.
5. Set is repaired and user settings remain unmodified.

As you mentioned it didn't work. Does this mean I can's use this box anymore? It looks there is no solution for me!!!

BTW, the re-seller didn't even bother himself to reply my email back. I don't want to name him here as I suppose it can be against forum rules!

[dishuser]

As you mentioned it didn't work. Does this mean I can's use this box anymore? It looks there is no solution for me!!!

BTW, the re-seller didn't even bother himself to reply my email back. I don't want to name him here as I suppose it can be against forum rules!

reseller doesn't matter
your warranty is over so why would he reply back