Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: broke mag254

  1. #1
    Junoir Member
    Join Date
    Aug 2017
    Location
    yes i do
    Posts
    18
    Rep Power
    0

    broke mag254

    Hi everyone and a happy new year!

    I dropped my mag254 on the floor so it stopped working.
    I have a new one on order.
    My question is: When I hook the new one up, do I just need to go to route
    checker and and reset new mac address?
    Or is there other things required to do?

  2. #2
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,721
    Rep Power
    448
    Quote Originally Posted by cliff85 View Post
    Hi everyone and a happy new year!

    I dropped my mag254 on the floor so it stopped working.
    I have a new one on order.
    My question is: When I hook the new one up, do I just need to go to route
    checker and and reset new mac address?
    Or is there other things required to do?
    that should be about it, yes for the MAC.
    You would have to setup the new mag's portal to match server info too of course
    I must not forget, we must not forget, that we are human beings.
    - Ren

  3. #3
    Chief Officer
    Join Date
    Nov 2014
    Posts
    651
    Rep Power
    55
    I don't have a mag but dropping some thing like that it might have dislodge a fuse if there is a fuse? i would open it up
    it is dead anyway so look in it and see if anything is out of place sorry handyman stuff

  4. #4
    Bad Street Fighter Ryu's Avatar
    Join Date
    Nov 2014
    Location
    Acquiring Signal
    Posts
    4,552
    Rep Power
    300
    Quote Originally Posted by jony604 View Post
    I don't have a mag but dropping some thing like that it might have dislodge a fuse if there is a fuse? i would open it up
    it is dead anyway so look in it and see if anything is out of place sorry handyman stuff
    I agree with you jony604
    All information provided is for informational purposes only. Use at your own risk.

  5. #5
    Junoir Member
    Join Date
    Aug 2017
    Location
    yes i do
    Posts
    18
    Rep Power
    0
    Crazed 2.0:

    Thanks for the confirmation.

    For any others:
    I opened the box and found no serviceable parts such as fuses.

  6. #6
    Bad Street Fighter Ryu's Avatar
    Join Date
    Nov 2014
    Location
    Acquiring Signal
    Posts
    4,552
    Rep Power
    300
    Quote Originally Posted by cliff85 View Post
    Crazed 2.0:

    Thanks for the confirmation.

    For any others:
    I opened the box and found no serviceable parts such as fuses.
    well atleast you tried to fix
    All information provided is for informational purposes only. Use at your own risk.

  7. #7
    TV Addicted
    Join Date
    Jan 2018
    Location
    Yes
    Posts
    1
    Rep Power
    0
    Generally there is no moving parts in the box -- the chances are it must have had a hard hit and cracked the board , if u look really carefully you will find the crack or a cold solder may have come off - does it power up at all ? If it doesn't then check the part where the adapter plugs in - probably a loose solder joint

  8. #8
    Bad Street Fighter Ryu's Avatar
    Join Date
    Nov 2014
    Location
    Acquiring Signal
    Posts
    4,552
    Rep Power
    300
    yup and that can easily be done by ohm/ digital multimeter as well. kof
    All information provided is for informational purposes only. Use at your own risk.

  9. #9
    Transparent Wall Technician crazed 9.6's Avatar
    Join Date
    Nov 2014
    Posts
    15,721
    Rep Power
    448
    had an old CNX Mini a long time ago and it was dead of winter, a dark stormy night at about 30 below. I had taken the Mini over to a freinds house to diagnose some issues he had at his pad.
    Came home and got outta my truck and promptly dropped that Mini directly onto that frozen rock hard concrete driveway ! Hit right on the corner of the mini's steel case, dented it big time too. No blood thou.

    I was then in first aid mode and brought the mini into the house and immediately started life saving operations (getting her warm was number one).
    took it's cas off and looked inside, it looked okay except that damn big dent that almost took out the mini's insides. I then plugged it into power and connected to TV , it came up with a messed up screen, I was devastated. I called the Mini's nearest relatives (the Duo and the Trio).. I told them that they better get over here cause their brother was about to pass

    I was about to nail a spike thru it (cause they said them dead receivers are door stops, but I did not know how that would work without a spike holding er down, cause a door of maybe 90 lbs will easily move a door stop like a mini with no trouble, so without that baby being spiked down it did not have an afterlife ... I needed to spike er

    But I had to stop. there were tears rolling down my face. So I plugged Mini in again just maybe to see some last throws before final death.. I do not know why.. I had frigging tears and the relatives were on the way... so I powered it up and .....the Mini came to life ! We had picture !

    haaaa... true story
    Last edited by crazed 9.6; 01-19-2018 at 02:51 AM.
    I must not forget, we must not forget, that we are human beings.
    - Ren

  10. #10
    Bad Street Fighter Ryu's Avatar
    Join Date
    Nov 2014
    Location
    Acquiring Signal
    Posts
    4,552
    Rep Power
    300
    Quote Originally Posted by crazed 2.0 View Post
    had an old CNX Mini a long time ago and it was dead of winter, a dark stormy night at about 30 below. I had taken the Mini over to a freinds house to diagnose some issues he had at his pad.
    Came home and got outta my truck and promptly dropped that Mini directly onto that frozen rock hard concrete driveway ! Hit right on the corner of the mini's steel case, dented it big time too. No blood thou.

    I was then in first aid mode and brought the mini into the house and immediately started life saving operations (getting her warm was number one).
    took it's cas off and looked inside, it looked okay except that damn big dent that almost took out the mini's insides. I then plugged it into power and connected to TV , it came up with a messed up screen, I was devastated. I called the Mini's nearest relatives (the Duo and the Trio).. I told them that they better get over here cause their brother was about to pass

    I was about to nail a spike thru it (cause they said them dead receivers are door stops, but I did not know how that would work without a spike holding er down, cause a door of maybe 90 lbs will easily move a door stop like a mini with no trouble, so without that baby being spiked down it did not have an afterlife ... I needed to spike er

    But I had to stop. there were tears rolling down my face. So I plugged Mini in again just maybe to see some last throws before final death.. I do not know why.. I had frigging tears and the relatives were on the way... so I powered it up and .....the Mini came to life ! We had picture !

    haaaa... true story
    thats what you call a true love. cnx mini loved you as much as you loved cnx mini. Mini decided to come back to life and did not wanted to leave you(even though mini was injured badly).
    you must be very happy when mini came back working fine
    All information provided is for informational purposes only. Use at your own risk.

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. EPG broke with update to Krypton
    By mwake in forum PVR Clients
    Replies: 4
    Last Post: 05-19-2017, 01:07 PM
  2. Vigilante botnet fights back against the botnet that almost broke the Internet
    By crazed 9.6 in forum Security, Anonymity & Cyber News
    Replies: 0
    Last Post: 04-24-2017, 05:05 PM
  3. Hackers and DDoS attacks almost broke the Internet !!
    By crazed 9.6 in forum Security, Anonymity & Cyber News
    Replies: 3
    Last Post: 11-29-2016, 09:03 AM
  4. Alright dang it who broke the site?
    By Sanford in forum Chit Chat Lounge
    Replies: 2
    Last Post: 10-27-2015, 03:41 AM
  5. A gang of robbers broke into a lawyer's club by mistake
    By 4wheelin in forum Jokes/Humor Forum in honor of bwcbob
    Replies: 0
    Last Post: 02-16-2015, 02:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •