Mandatory Update

[BIO]

UPDATE APR 29
No need to update manually anymore, it will now update itself after a factory reset.

Copy/Paste

TVonline:

Step 1: Check which is your build number by going to: “settings > system info > build number”

Step 2: If you have build 1.0.07: Download the second file below
If you have build 1.0.08: Download the first file below
**Rembmer: do not extract any of the “update.zip” file, just copy it over

Step 3: Place the correct build update.zip file on a USB/Jump drive (do not extract or change file name)

Step 4: Plug in the USB/Jump drive to the back of the device and power up your device

Step 5: A Firmware update message will pop up and click “install”

Step 6: Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings > system info > build number”. Now you should be able to access MickyHop channel store once again.

Please follow these 6 steps to complete the software update for your VIXO 1 or TVonline device. Make sure you download the correct update.zip file for your build. If you require more assistance please open a ticket at our help desk.

[K00lKatT]

update worked perfectly..back in business..

[K00lKatT]

Correction: according to avov site after update for tvonline users, your build # should be 1.0.09, thks..

[johnhodge]

Forgot to say I have tvonline and with market it give an error failed to download

[K00lKatT]

you need the mandatory update, it's posted here on site, make sure you use the correct one based on your build #, thks..
see post #1..

[K00lKatT]

excuse me, be specific, pls

[johnhodge]

Do I have to open the zip file than copy it to usb

[johnhodge]

I have copied the file as it is on a usb

[K00lKatT]

download the zipped file to desktop, insert zip drive in puter, move file just as it is in zipped format to zip drive and follow BIO's instructions...the file works fine..been verified..

[K00lKatT]

only put the file for your build # on the drive, follow the directions exactly, there is no need to reboot until whole process is finished