Mandatory Update

[BIO]

UPDATE APR 29
No need to update manually anymore, it will now update itself after a factory reset.

Copy/Paste

TVonline:

Step 1: Check which is your build number by going to: “settings > system info > build number”

Step 2: If you have build 1.0.07: Download the second file below
If you have build 1.0.08: Download the first file below
**Rembmer: do not extract any of the “update.zip” file, just copy it over

Step 3: Place the correct build update.zip file on a USB/Jump drive (do not extract or change file name)

Step 4: Plug in the USB/Jump drive to the back of the device and power up your device

Step 5: A Firmware update message will pop up and click “install”

Step 6: Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings > system info > build number”. Now you should be able to access MickyHop channel store once again.

Please follow these 6 steps to complete the software update for your VIXO 1 or TVonline device. Make sure you download the correct update.zip file for your build. If you require more assistance please open a ticket at our help desk.