Screen stuck on loading screen after entering authorization info

[sardana]

Entered authorization ID and a password, after that it is stuck on loading screen. not moving at all

I am using STB emulator on my android box.

read somewhere to change the mac to 00:1A:78:xx:xx:xx instead of 00:1A:79:xx:xx:xx

Also, do i need to enter authorization info every time I reboot the device?

Pls advise.

Thanks

[sardana]

for MAC address shall I be using my box exact mac or just last 3-4 digits and rest 00:1A:79:

[thesupporter]

for MAC address shall I be using my box exact mac or just last 3-4 digits and rest 00:1A:79:

I tried this method and it failed. I tried using the first three segments of a generated mac and my last three - failed. Tried using .........................

Asked on here and got shot down, for apparently being inept at reading simple instructions!

[catz]

Your last sentence says it all!!

[thesupporter]

Your last sentence says it all!!

If that is aimed at me, which I believe it is, then I was rewording your comments: "If you can not make sense out of basic instructions I dont know what to tell you"

Could you please add a sticky to the main forum that states that 'If you arrived at this site for help, do not expect it without being kicked in the balls first'.

[daddyrat50]

for MAC address shall I be using my box exact mac or just last 3-4 digits and rest 00:1A:79:

You need to use 00:1A:78:XX:XX:XX. Use 78 NOT 79 and use your whole mac number

[thesupporter]

You need to use 00:1A:78:XX:XX:XX. Use 78 NOT 79 and use your whole mac number

The PC MAC is 6 segments - xx:xx:xx:xx:xx:xx but you are saying use the standard three segments, then add another three (from six). I think is the bit that people are not getting; I for one.

[crazed 9.6]

the first 3 sets of MAC digits (prefix) are the devices Identifier.
00:1A:78 is for the stalker or the emulator applications.
If using one of them applications then you must use that prefix.

You do not use the MAC from the actual device, weather it be a computer or another IPTV receiver.
The Stalker needs the 00:78:1A prefix
Then the last 3 sets of digits can be almost anything, but use the last sets from your device or use an online MAC generator to generate a working MAC addy

with the generator below, set the prefix and set the format and then generate a MAC, then link that MAC to your Route number.
Then enter it onto your Stalker app and try to connect.

http://www.miniwebtool.com/mac-address-generator/

You see, with them stalker or emulator programs, you do not use the MAC of the device, you use a MAC with a prefix that the Stalker and the server recognize.

Now the other MAC prefix is 00:79:1A and that is strictly if you are using an Avov receiver or a Mag receiver or a Dreamlink T1 receiver.


The server website is giving you that error message because you are trying to use your PCs MAC addy, which is wrong.
That MAC addy has a prefix that the server and Stalker do not recognize.

[thesupporter]

Thanks Crazed. I did try this, but that was the attempt that gave me the error that I had too many attempts, so I hope that I can hit this in one go once the 24 hour counter gives up.

I appreciate your help and I hope to enjoy better times on here, once I actually know what the hell I am doing. Kudos.

the first 3 sets of MAC digits (prefix) are the devices Identifier.
00:1A:78 is for the stalker or the emulator applications.
If using one of them applications then you must use that prefix.

You do not use the MAC from the actual device, weather it be a computer or another IPTV receiver.
The Stalker needs the 00:78:1A prefix
Then the last 3 sets of digits can be almost anything, but use the last sets from your device or use an online MAC generator to generate a working MAC addy

with the generator below, set the prefix and set the format and then generate a MAC, then link that MAC to your Route number.
Then enter it onto your Stalker app and try to connect.

http://www.miniwebtool.com/mac-address-generator/

You see, with them stalker or emulator programs, you do not use the MAC of the device, you use a MAC with a prefix that the Stalker and the server recognize.

Now the other MAC prefix is 00:79:1A and that is strictly if you are using an Avov receiver or a Mag receiver or a Dreamlink T1 receiver.


The server website is giving you that error message because you are trying to use your PCs MAC addy, which is wrong.
That MAC addy has a prefix that the server and Stalker do not recognize.

[crazed 9.6]

Thanks Crazed. I did try this, but that was the attempt that gave me the error that I had too many attempts, so I hope that I can hit this in one go once the 24 hour counter gives up.

I appreciate your help and I hope to enjoy better times on here, once I actually know what the hell I am doing. Kudos.

send me the MAC addy you want and I will link it for you.