Frustration

[NONOBADGIRL]

Frustration has set in.... I'm working on this a week now... I'm at the point where I have a message on the screen... Output mode mismatch change to SD.... Something something...I can't read it because it's scrolling too fast... And I can't get it to do anything 👿

[theone]

Frustration has set in.... I'm working on this a week now... I'm at the point where I have a message on the screen... Output mode mismatch change to SD.... Something something...I can't read it because it's scrolling too fast... And I can't get it to do anything ��

What box are you running?

[NONOBADGIRL]

I'm running a mag254

[theone]

I'm running a mag254

When you reboot the box, keep hitting the menu button on the remote and that will take you into boot mode, then from then you can change the settings. I also moved your thread to the proper forum. I forgot to mention that you will need to use the RCA Cables to view the video as it will not connect to the HDMI until you fix it.

[NONOBADGIRL]

I can't even reboot it..it's stuck on that scrolling message ��

[theone]

I can't even reboot it..it's stuck on that scrolling message ��

Unplug it from the back of the box.

[theone]

Ok well, im not sure if the problem has been solved lol or you just had to go for a bit lol.

[NONOBADGIRL]

I've tried that ... Still get scrolling message ��

[theone]

Are you not able to get into the box or its settings?

[theone]

Unplug mag
Hold remote button that has three lines and three dots
Keep it held down and aimed at mag and now plug it in
You now are in the mags bios mode
Make video changes change it to ntsc there and save and exit