fuse took a update now locks up!

[cl2224]

I have had my fuse and dvbs2 tuner for awhile now, everything worked fine till Monday when it tooka update . now comes on works for about 60 seconds then locks up, remote will not work at all. Did a factory reset now iam at welcome screen and locked up there! Changed batteries in remote still the same. Any body else with this problem? What to do!

[Farmer1]

do a manual reset

Manual Factory Data Reset.
1) Make sure the box is connected to the TV by HDMI or RCA
2) Make sure the power is plugged out of the box
3) Push and hold the reset button with the pin for 10 seconds
4) Continue to hold it down and plug the power into the box
5) Hold the reset button for at least another 5 seconds and then let go
6) Proceed to wait for a bit while the box resets, it should open up again in console mode
7) Select the factory data reset option
8) The box will perform a factory data reset and reboot
9) It should then boot normally and start working. If it boots into the console mode again, make sure to just select perform normal boot up (I believe it is the first option)

[cl2224]

do a manual reset

Manual Factory Data Reset.
1) Make sure the box is connected to the TV by HDMI or RCA
2) Make sure the power is plugged out of the box
3) Push and hold the reset button with the pin for 10 seconds
4) Continue to hold it down and plug the power into the box
5) Hold the reset button for at least another 5 seconds and then let go
6) Proceed to wait for a bit while the box resets, it should open up again in console mode
7) Select the factory data reset option
8) The box will perform a factory data reset and reboot
9) It should then boot normally and start working. If it boots into the console mode again, make sure to just select perform normal boot up (I believe it is the first option)

Tryed it came up like you said ,but remote will not work so I cannot select factory reset.And I have 2 remotes one that came with my online plus box which I am using now. So it has to be in that software update! Any further heip would be much appreciated. Thanks

[crazed 9.6]

did you try disconnecting the DVB S2 tuner ?

[cl2224]

did you try disconnecting the DVB S2 tuner ?

Yes tried that same thing ,remote just does not work. Thanks

[Marley]

when you said two is it a different remote then avov one

[cl2224]

when you said two is it a different remote then avov one

both remotes are the same. fuse & onlineplus are the same. Thanks

[Marley]

then do what crazed said and update

[cl2224]

then do what crazed said and update

just to follow up, avov told me to use key board & mouse which youplug in usb port, and got box reset and working again tvonline works fine. But remote still does not work? so still working on that, will follow up when I get it going again. still have tunner unplugged will try it tomorrow.

[cl2224]

just to follow up, avov told me to use key board & mouse which youplug in usb port, and got box reset and working again tvonline works fine. But remote still does not work? so still working on that, will follow up when I get it going again. still have tunner unplugged will try it tomorrow.

remote started working again! I guess box fixed its self after doing that reset. Also I don't think the dvb-s2 tuner had any thing to do with it, just software issue I believe. thanks for help.