How to update firmware on MAG 250

[moskivb]

Using a USB flash drive

On USB - drive, the file system FAT32, create a directory mag200 to STB MAG-200 and/or mag250/254 to STB MAG-250/254 (If your USB - drive multiple partitions, then use the first partition)
Update using bootstrap:
Written in the directory mag200(mag250/254) files imageupdate and bootstrap. For STB MAG-250/254 file bootstrap_250/254 renamed bootstrap.
Update not using bootstrap:
Written in the directory mag200(mag250/254) file imageupdate which taken from releases from MAG200/250/254.
If your STB MAG-200/250/254 several USB connectors then use to update the rear connector.

In the boot menu (BIOS)

On a USB drive should be two files imageupdate and bootstrap

Enter The BIOS
Select “Upgrade Tools”, pressing enter on the remote control to the right
Select “USB Bootstrap”
Connect the USB flash drive and click OK to confirm the beginning of the update process
Wait for the update, STB will reboot.

In an internal software

Go to “System settings” by pressing «Setup», «Services» or «SET» on the remote control (depending on the version the remote control)
Select “Software update”.
Select update “From USB” ⇒ “Start update”. If the preceding items are correct you will see a window with information about the current software version, select the drive or partition and the file path.
Select “Verify”. If the test is successful you'll see information about the availability of new versions of software.
Select “Start update” to begin the update.
After the update successful - STB must be rebooted.

Index of /mag250/release/0.2.18-r8 - http://soft.infomir.com.ua/mag250/release/0.2.18-r8/

Index of /mag254/release/0.2.18-r8 - http://soft.infomir.com.ua/mag254/release/0.2.18-r8/