-
Mandatory Update
UPDATE APR 29
No need to update manually anymore, it will now update itself after a factory reset.
Copy/Paste
TVonline:
Step 1: Check which is your build number by going to: “settings > system info > build number”
Step 2: If you have build 1.0.07: Download the second file below
If you have build 1.0.08: Download the first file below
**Rembmer: do not extract any of the “update.zip” file, just copy it over
Step 3: Place the correct build update.zip file on a USB/Jump drive (do not extract or change file name)
Step 4: Plug in the USB/Jump drive to the back of the device and power up your device
Step 5: A Firmware update message will pop up and click “install”
Step 6: Your device will restart and all the firmware update will be applied. After it’s done you should make sure you have build 1.0.11 from “settings > system info > build number”. Now you should be able to access MickyHop channel store once again.
Please follow these 6 steps to complete the software update for your VIXO 1 or TVonline device. Make sure you download the correct update.zip file for your build. If you require more assistance please open a ticket at our help desk.
-
update worked perfectly..back in business..
-
Correction: according to avov site after update for tvonline users, your build # should be 1.0.09, thks..
-
-
can someone help me I did a factory reset now it does not let me enter server to add url
-
Forgot to say I have tvonline and with market it give an error failed to download
-
you need the mandatory update, it's posted here on site, make sure you use the correct one based on your build #, thks..
see post #1..
-
I have copy the file but does not download it
-
excuse me, be specific, pls
-
Do I have to open the zip file than copy it to usb