Originally Posted by
BIO
After the reset (Def. Settings)....
After you factory reset your box, dhcp and tftp loading is the default.
To get back to booting correctly unplug and plug back in the box, then menu into bios again.
Once there go to "Boot Mode" and right arrow to change it to "NAND" or NAND2"
Then scroll down to "Exit & Save" and right arrow, then "OK" to save and reboot.
Mine did an update after it rebooted, so let the update load and it will reboot again by itself.
It will boot into where you see "Home Media", IPTV Channels" "Internet Bookmarks" Etc. screen when finished- just like when you first plugged it in out of the box.
Please note that any time you press the "OK" remote button in the bios, give it time to work because it takes a few seconds.