BIO
01-12-2015, 07:28 PM
This is what worked for me...
The emulator works on any android device. Download is in post 3. mxplayer or vlc player is available through google play and many other app places. Discussion thread is here ::
Discussion (http://iptvtalk.net/showthread.php?565-IPTV-setup-for-Dreamlink-Android-discussion-thread/)
For testing purposes, use at your own risk :)
I used this file for vasilchmax, I couldn't download it from google so found it and loaded it via usb.
Download it from below.
Extract it and put it on an usb drive.
Plug it into your dreamlink android
Go to "My Apps" from the main page
Choose App Installer".
Scroll down to your usb and select it
Scroll down and select STB Emulator
Select Install
After it installs I selected open and started the app.
Once the app loaded you're looking at basically the mag menu.
No need to worry about anything with that now.
Hit the cursor button on your remote
Using the cursor, scroll up to the top of your screen where nothing is.
click twice or go all the way up and you'll see options at the right.
First one looks like 3 slide bars, click it for settings
In profiles I selected add profile
Name the profile
Change the stb model to mag250
Select portal settings
In portal settings you put the server name.
Exit back out one
Change the last three sets of your mac address. Leave the first 3 sets of digits there because it designates what type of receiver it is.
I used the mac from the bottom of my receiver but it can be anything right now
Change the serial number to something else, maybe what is under your receiver
Changed my ip to within my ip range.
Exited out.
At the main page I hit the menu button and selected exit to exit the app
Started the app again and hit the menu again to made sure my profile was selected
Then selected internal player for media player which made it reboot.
It loaded into the portal and worked after the reboot
I see mention in the forum that some need another media player installed.
If you have problems with video, try loading MX video player too.
After I got mine working I deleted the app and started the install from scratch to write these steps. I do not know if this will still work when the trial is over.
Good luck
EDIT::
After playing with mine some I started getting some glitching and artifacts.
To fix that I exited out of the movie and pressed menu on the remote.
Then I selected external player.
Menu came up for what program to use, selected mxplayer, and allowed it to reboot.
After that the progress bar was gone and so far the video is playing better.
Also, do not scroll over to settings in the menus to try to change anything, it will just lock it up.
Shows message about Emulator core initialization failed.
You'll need to press menu on your remote again and exit out again if you do.
The emulator works on any android device. Download is in post 3. mxplayer or vlc player is available through google play and many other app places. Discussion thread is here ::
Discussion (http://iptvtalk.net/showthread.php?565-IPTV-setup-for-Dreamlink-Android-discussion-thread/)
For testing purposes, use at your own risk :)
I used this file for vasilchmax, I couldn't download it from google so found it and loaded it via usb.
Download it from below.
Extract it and put it on an usb drive.
Plug it into your dreamlink android
Go to "My Apps" from the main page
Choose App Installer".
Scroll down to your usb and select it
Scroll down and select STB Emulator
Select Install
After it installs I selected open and started the app.
Once the app loaded you're looking at basically the mag menu.
No need to worry about anything with that now.
Hit the cursor button on your remote
Using the cursor, scroll up to the top of your screen where nothing is.
click twice or go all the way up and you'll see options at the right.
First one looks like 3 slide bars, click it for settings
In profiles I selected add profile
Name the profile
Change the stb model to mag250
Select portal settings
In portal settings you put the server name.
Exit back out one
Change the last three sets of your mac address. Leave the first 3 sets of digits there because it designates what type of receiver it is.
I used the mac from the bottom of my receiver but it can be anything right now
Change the serial number to something else, maybe what is under your receiver
Changed my ip to within my ip range.
Exited out.
At the main page I hit the menu button and selected exit to exit the app
Started the app again and hit the menu again to made sure my profile was selected
Then selected internal player for media player which made it reboot.
It loaded into the portal and worked after the reboot
I see mention in the forum that some need another media player installed.
If you have problems with video, try loading MX video player too.
After I got mine working I deleted the app and started the install from scratch to write these steps. I do not know if this will still work when the trial is over.
Good luck
EDIT::
After playing with mine some I started getting some glitching and artifacts.
To fix that I exited out of the movie and pressed menu on the remote.
Then I selected external player.
Menu came up for what program to use, selected mxplayer, and allowed it to reboot.
After that the progress bar was gone and so far the video is playing better.
Also, do not scroll over to settings in the menus to try to change anything, it will just lock it up.
Shows message about Emulator core initialization failed.
You'll need to press menu on your remote again and exit out again if you do.