Factory Reset File - does not work on the Plus box

[Capt.Kangaroo]

Factory reset file for T1 Plus

Please do the following
-. unzip the attached file : _recovery_facinit
-. store this to USB stick.
-. connect to T1 Plus
-. Power on T1 Plus and press channel up button on remote control until "system update" message pops up.
-. wait until T1 Plus booting is done.
EDIT: store that " _recovery_facinit" to root (top folder) folder of your usb stick memory.
and when you power on T1, you should click channel up button continuously until recovery menu pops up.
and do not touch anything until everything done.


http://www.mediafire.com/file/7xwjkxalnn01ebj/_recovery_facinit.zip


Read the thread here before trying this method
http://iptvtalk.net/showthread.php?20309-Factory-Reset-File-for-T1

This is the correct file.
Reset file contains just a command in it.
The Zip file is actually 148bytes

Insert a USB Memory stick in your USB Port on your PC.
Click download and when its done, it will appear on the bottom left corner of browser
(On Chrome anyway)
. If you have WinRar or WinZip it will say _recovery_facinit.zip.
Click the little ^ bultton and click Show In Folder.
Once there, right click on that zip file and Select Extract Here. You will see a new file pop up. named recovery_facinit. Now, right click that file and select Send To from the Menu.and direct it to your USB Drive(usually, E or F or G). then insert that USB Drive into the T1(+) and
Power on T1 Plus and press channel up button on remote control until "system update" message pops up.
-. wait until T1 Plus booting is done.



Last edited by Captainkangaroo (http://iptvtalk.net/posthistory.php?p=209820); Today at 02:16 AM.

[bombz]

File extracts to 0KB
Re-post ?


_recovery_facinit.zip = 1kb
_recovery_facinit = 0KB (when unpacked)

hm, good to go ?

[Marley]

yea says 0 nothing there and download is not working say trying to repair the download you may need rar the file first

[Capt.Kangaroo]

File extracts to 0KB
Re-post ?
_recovery_facinit.zip = 1kb
_recovery_facinit = 0KB (when unpacked)
hm, good to go ?
Read the thread here before trying this method
http://iptvtalk.net/showthread.php?2...et-File-for-T1 (http://iptvtalk.net/showthread.php?20309-Factory-Reset-File-for-T1)


That is the correct file.
Reset file contains just a command in it.
The Zip file is actually 148bytes

Insert a USB Memory stick in your USB Port on your PC.
Click download and when its done, it will appear on the bottom left corner of browser
(On Chrome anyway)
. If you have WinRar or WinZip it will say _recovery_facinit.zip.
Click the little ^ bultton and click Show In Folder.
Once there, right click on that zip file and Select Extract Here. You will see a new file pop up. named recovery_facinit. Now, right click that file and select Send To from the Menu.and direct it to your USB Drive(usually, E or F or G). then insert that USB Drive into the T1(+) and
Power on T1 Plus and press channel up button on remote control until "system update" message pops up.
-. wait until T1 Plus booting is done.

[bombz]

I wanted to double check. The RAR/ZIP = 1kb
extracted it is 0kb (as i understand it is 'bytes' of data) which is showing 0

Thanks

[bombz]

Can't get it to work :-(
The dreamlink will no longer get a system time at all. Tried factory reset, no change
tried to flash this file and it just boots to the splash screen

[flashman]

Sorry guys. I know this is in the wrong place but can anyone direct me to someone who knows about Dreamlink T5 satellite nfps/iks tv? Have they had a blackout?

Thanks

[Capt.Kangaroo]

Sorry guys. I know this is in the wrong place but can anyone direct me to someone who knows about Dreamlink T5 satellite nfps/iks tv? Have they had a blackout?

Thanks
for IKS go here
http://fta66.com/forum.php

[bombz]

has anyone tested the factory reset file, it appears as 0kb when unpacked.
I still attempted to flash it via instructions but the box just loads up as per normal.

[Marley]

what do you mean per normal ? and if you read what cap said your right on size

[bombz]

I mean I toss the file on a flash, and hold CHAN UP while it's booting, and the box boots as per normal, right to the splash screen, so not able to factory reset it. I must be missing something?

[Capt.Kangaroo]

I mean I toss the file on a flash, and hold CHAN UP while it's booting, and the box boots as per normal, right to the splash screen, so not able to factory reset it. I must be missing something?
should store that " _recovery_facinit" to root (top folder) folder of your usb stick memory.
and when you power on T1, you should click channel up button continuously until recovery menu pops up.
and do not touch anything until everything done.

[amigofred]

A command that has 0 bytes ????????
that file is EMPTY and it does not work
I try to read the command and the file has NOTHING
We all in here are not stupid.

THAT FILE HAS NO COMMANNNNNNNNDDDDDDDDD OK

[amigofredd]

should store that " _recovery_facinit" to root (top folder) folder of your usb stick memory.
and when you power on T1, you should click channel up button continuously until recovery menu pops up.
and do not touch anything until everything done.

How long do you have to press the up channel on the remote control ???? I CONTINUOUSLY press the button almost 5 minutes and nothing. Is that ok ??????

[wineonnine]

ever time I use winzip it says 0 files , 146 before need help tks wine
got dl fixed, understand the 0 still wont download, ill try again since I got
it fix wine