AVOV Fuse ATSC Tuner Bug Report Here

[Hemiclone]

I Just got my astc tuner in hand guys thanks > I just opened the box and it does sat as well two cable type inputs. Going to play now will update soon.

[Marley]

now thats great news

[theone]

I just installed mine and it needs a lot of work. Numbers don't correspond to the frequency but did notice that it says US ATSC so that may be the case also the channels don't change well, I can only get 3 channels when using the remote although it did scan more than 3. There is no channel name on the info guide and the channel change delay is long. Only one good thing about this is that the picture quality is nice, oh and one other thing, doesn't scan all my channels that my TV scans so missing some.

[Marley]

do you have the new update in for fuse that we got a few days ago

[theone]

do you have the new update in for fuse that we got a few days ago
Yes but this tuner needs a lot of work there's just so many things wrong with it. Voice drops off now and then. Its seems to scan Auto ok but misses quite a few channels that I normally get with my TV, manual scan is not working properly, so the tuner or the signal needs tweaking with new software. Channel names are missing and channel change is too long.

[Hemiclone]

I agree Audio sync out on most stations very slow and not pulling in most stations I hope this will tweak with software. I did notice the sat tuner will work with motor drives although haven't tried yet.

[Hemiclone]

No epg working ,could not make a recording, and just half the channels that my other receivers gets on the same ant. very slow to react and a cumbersome interface . Needs a lot of revision to software and soon I hope! It would be nice if Avov could set up a FAQ and setup instruction for the Fuse box and addons please.

[cl2224]

I Just got my astc tuner in hand guys thanks > I just opened the box and it does sat as well two cable type inputs. Going to play now will update soon.
Areyou saying that it does ota as well as fta sat?

[theone]

Areyou saying that it does ota as well as fta sat?

It does have both Antenna In And Sat In on the back of the tuner.

[Marley]

they are working on it and a update will come soon

[Hemiclone]

Thanks again ASFT you are the number 1 source of info for aVOV products

[Marley]

yea i run them and more good stuff coming

[Hemiclone]

A resource for manual astc setup is hope it helps find those missing stations


www.tvfool.com

[theone]

This thread is solely for the new ATSC Tuner, Please post any bugs here, thanks.

[theone]

The frequency is off with the channel numbers, the list below is how it should be:


(CH) (Freq)

07 177
08 183
09 189
10 195
11 201
12 207
13 213


14 473
15 479
16 485
17 491
18 497
19 503
20 509
21 515
22 521
23 527
24 533
25 539
26 545
27 551
28 557
29 563
30 569
31 575
32 581
33 587
34 593
35 599
36 605
37 611
38 617
39 623
40 629
41 635
42 641
43 647
44 653
45 659
46 665
47 671
48 677
49 683
50 689
51 695
52 701
53 707
54 713
55 719
56 725
57 731
58 737
59 743
60 749
61 755
62 761
63 767
64 773
65 779
66 785
67 791
68 797
69 803

[Hemiclone]

by tweaking my ant. at home I now get the channels I should .

[theone]

For me it doesn't scan properly as the channels I get on my TV are more than the tuner and also another note that there are sub channels within the main channels that the auto scan misses. The signal is too weak on the tuner so that is one reason why I am still missing some channels that are strong signal on my TV.

[wickedjoker]

I got My tuner yesterday the 12th works but yeah voice is definitely off guide doesn't show correctly. What happened to the dash channel like 4-1 same with the same antenna i get more channels directly from my TV I don't get it?

[Hemiclone]

Wickedjoker could you explain how did you get the guide to work?

[wickedjoker]

Wickedjoker could you explain how did you get the guide to work?

I believe it was while you are in the TV program press menu I did it last night while I was drunk! BTW it didn't show anything just the channel number and station ID....



Also does anyone know if the SAT in on the tuner will for for FTA SAT? Has anyone attempted it?

[Hemiclone]

I think I got to the point of seeing a signal on the scan and found a menu that included motor drive but I haven't followed it up by getting any stations yet. I doubt at this time it will work with encrypted signals though.

[theone]

I think I got to the point of seeing a signal on the scan and found a menu that included motor drive but I haven't followed it up by getting any stations yet. I doubt at this time it will work with encrypted signals though.
The Satellite part of the tuner is only for True FTA. It wont work with DN.

[wickedjoker]

Thanks for the update gents!

[Hemiclone]

I am surprised are only three of us testing these tuners?

[Marley]

not many need the tuner but post whats wrong here and i will send it out like i did

[Marley]

please post what you need fixing on that and will try hard to get it fixed

[Marley]

they said there was a update for fuse try a new scan now

[Hemiclone]

Today I was watching a program and the voices were sped up just a little sounding like chipmunks, it was very funny but not correct. Not able to record yet but can set up to record, Icon and timer appear on top right of screen but timer stays at 00:00. epg doesn't fill in at all. Station cancelling is a little overzealous. Speed of switching is very slow. Would be nice to get an operating manual for the fuse and accessories. Sorry if I'm repeating myself . thanks hemiclone

[theone]

they said there was a update for fuse try a new scan now

Thanks bro for the update. Going to try it tomorrow since I just got in.

[theone]

they said there was a update for fuse try a new scan now

Hey asft, I just checked my box for any new updates but there was none.

[Marley]

do you get 30 or more channels working ?

[Hemiclone]

I am in the low 20s for available channels (without moving ant.) Niagara area Ontario.

[theone]

do you get 30 or more channels working ?

I don't get all the channels that I should get. One example is the sub channels like 29.2 is missing. If I get channel 29 then all the sub channels should automatically scan as well plus the signal meter is off along with the frequency don't match the channel numbers as I listed in my other post, no channel names or guide. Im sure there is more.

[wickedjoker]

Yep I have the same issue!

[Marley]

ok sent it in

[Marley]

they say it depends on the antenna you use try a better one if you can which i can see

[theone]

they say it depends on the antenna you use try a better one if you can which i can see

Lol, no its not the antenna bro. There's more to whats wrong with the tuner. My antenna is the top of the line that's installed on the roof on a 10 foot pole and I get all the channels on my TV. The tuner doesn't work properly with the scanning and the guide and whole lot of other things. I believe the software needs to be fixed. It seems that I am not the only one with the same issues.

[T1234]

I askede in the other thread what was wrong with the original Tuners. The reason I asked is that I have the DVB-S and DVB-T tuners, and I am having the same issues with audio in both.

I get UK freeview TV with the DVB-T and I am on Satellite Astra 28.2E (Sky UK). Both are unwatchable. Hopefully this issue is fixed.

[LEAFER9999]

good luck with these units guys

[TVTRAPPER]

is there a How to set up my Tuner I just got it today :) I would like to set it up without going threw all these post's "I am up to Page 3" . Thanks

Update, Scanning for Channels now, Pretty slow scanning, Fingers Crossed :)